Настройка Mono / ASP.NET 4.0 на Apache2 / Ubuntu: виртуальные хосты?

9

Я пытаюсь настроить Mono / ASP.NET 4.0 на моем сервере Apache (который работает в Ubuntu). До сих пор я следил за несколькими учебниками / сценариями, представленными здесь и здесь .

На данный момент:

  • Установлен Apache 2.2 (доступен через localhost)
  • Mono 2.10.5 установлен

Тем не менее, я изо всех сил пытаюсь настроить Apache правильно ... очевидно, что параметр Virtual Host не выполняет свою работу и не вызывает плагин mod_mono, и при этом он даже не извлекает источник из правильного каталога. Хотя параметр Virtual Host указывает на «\ srv \ www \ localhost», он явно извлекает контент из «var / www /», который, как я обнаружил, является DocumentRoot по умолчанию для виртуальных хостов.

Я могу подтвердить:

  • "/opt/mono-2.10/bin/mod-mono-server4" существует.
  • Файл виртуальных хостов читается, так как при отмене комментария в основном httpd.conf корневой каталог изменился с 'htdocs' на 'var / www /'
  • Установка Mono, по крайней мере, частично способна запускать ASP 4.0, о чем свидетельствует запуск XSP, переход к 0.0.0.0:8080/ и получение страницы ошибок в стиле ASP.NET с «Mono ASP 4.0.x» внизу.

Кто-нибудь может указать, как исправить эти конфигурации и связать Mono с Apache?

Вот мои конфиги и соответствующая информация:

/usr/local/apache2/conf/httpd.conf:

#
# This is the main Apache HTTP server configuration file.  It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
# In particular, see 
# <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
# for a discussion of each configuration directive.
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.  
#
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path.  If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/foo_log".

#
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to point the LockFile directive
# at a local disk.  If you wish to share the same ServerRoot for multiple
# httpd daemons, you will need to change at least LockFile and PidFile.
#
ServerRoot "/usr/local/apache2"

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80

#
# Dynamic Shared Object (DSO) Support
#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#

<IfModule !mpm_netware_module>
<IfModule !mpm_winnt_module>
#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User daemon
Group daemon

</IfModule>
</IfModule>

# 'Main' server configuration
#
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition.  These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
#
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
#

#
# ServerAdmin: Your address, where problems with the server should be
# e-mailed.  This address appears on some server-generated pages, such
# as error documents.  e.g. admin@your-domain.com
#

ServerAdmin david@localhost

#
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#

ServerName localhost:80

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/usr/local/apache2/htdocs"

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories). 
#
# First, we configure the "default" to be a very restrictive set of 
# features.  
#
<Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
</Directory>

#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

#
# This should be changed to whatever you set DocumentRoot to.
#
<Directory "/usr/local/apache2/htdocs">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Order allow,deny
    Allow from all

</Directory>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
<IfModule dir_module>
    DirectoryIndex index.html
</IfModule>

#
# The following lines prevent .htaccess and .htpasswd files from being 
# viewed by Web clients. 
#
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
</FilesMatch>

#
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn

<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    CustomLog "logs/access_log" common

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    #CustomLog "logs/access_log" combined
</IfModule>

<IfModule alias_module>
    #
    # Redirect: Allows you to tell clients about documents that used to 
    # exist in your server's namespace, but do not anymore. The client 
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar

    #
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    #
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL.  You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.

    #
    # ScriptAlias: This controls which directories contain server scripts. 
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client.  The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    #
    ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/"

</IfModule>

<IfModule cgid_module>
    #
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #
    #Scriptsock logs/cgisock
</IfModule>

#
# "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
#
<Directory "/usr/local/apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>

#
# DefaultType: the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value.  If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain

<IfModule mime_module>
    #
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    #
    TypesConfig conf/mime.types

    #
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #
    #AddType application/x-gzip .tgz
    #
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    #
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    #
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz

    #
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    #
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #
    #AddHandler cgi-script .cgi

    # For type maps (negotiated resources):
    #AddHandler type-map var

    #
    # Filters allow you to process content before it is sent to the client.
    #
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
</IfModule>

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type.  The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
#MIMEMagicFile conf/magic

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or 0 for unlimited
# Default setting is to accept 200 Ranges
#MaxRanges 0

#
# EnableMMAP and EnableSendfile: On systems that support it, 
# memory-mapping or the sendfile syscall is used to deliver
# files.  This usually improves server performance, but must
# be turned off when serving from networked-mounted 
# filesystems or if support for these functions is otherwise
# broken on your system.
#
#EnableMMAP off
#EnableSendfile off

# Supplemental configuration
#
# The configuration files in the conf/extra/ directory can be 
# included to add extra features or to modify the default configuration of 
# the server, or you may simply copy their contents here and change as 
# necessary.

# Server-pool management (MPM specific)
#Include conf/extra/httpd-mpm.conf

# Multi-language error messages
#Include conf/extra/httpd-multilang-errordoc.conf

# Fancy directory listings
#Include conf/extra/httpd-autoindex.conf

# Language settings
#Include conf/extra/httpd-languages.conf

# User home directories
#Include conf/extra/httpd-userdir.conf

# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf

# Virtual hosts
Include conf/extra/httpd-vhosts.conf

# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf

# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf

# Various default settings
#Include conf/extra/httpd-default.conf

# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
#
# Note: The following must must be present to support
#       starting without SSL on platforms with no /dev/random equivalent
#       but a statically compiled-in mod_ssl.
#
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>

* /usr/local/apache2/conf/extra/httpd-vhosts.conf *

#
# Virtual Hosts
#
# If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at 
# <URL:http://httpd.apache.org/docs/2.2/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#
NameVirtualHost *:80

#
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for all requests that do not
# match a ServerName or ServerAlias in any <VirtualHost> block.
#

<VirtualHost *:80>
ServerName localhost
 ServerAdmin david@localhost
  DocumentRoot "/srv/www/localhost"

    # MonoServerPath can be changed to specify which version of ASP.NET is hosted
    # mod-mono-server1 = ASP.NET 1.1 / mod-mono-server2 = ASP.NET 2.0
    # For SUSE Linux Enterprise Mono Extension, uncomment the line below:
    # MonoServerPath localhost "/opt/novell/mono/bin/mod-mono-server2"
    # For Mono on openSUSE, uncomment the line below instead:
    MonoServerPath localhost "/opt/mono-2.10/bin/mod-mono-server4"

    # To obtain line numbers in stack traces you need to do two things: 
    # 1) Enable Debug code generation in your page by using the Debug="true" 
    #    page directive, or by setting <compilation debug="true" /> in the 
    #    application's Web.config
    # 2) Uncomment the MonoDebug true directive below to enable mod_mono debugging
    MonoDebug localhost true

    # The MONO_IOMAP environment variable can be configured to provide platform abstraction
    # for file access in Linux.  Valid values for MONO_IOMAP are:
    #    case
    #    drive
    #    all
    # Uncomment the line below to alter file access behavior for the configured application
    MonoSetEnv localhost PATH=/opt/mono-2.10/bin:$PATH;LD_LIBRARY_PATH=/opt/mono-2.10/lib:$LD_LIBRARY_PATH;
    #
    # Additional environtment variables can be set for this server instance using 
    # the MonoSetEnv directive.  MonoSetEnv takes a string of 'name=value' pairs 
    # separated by semicolons.  For instance, to enable platform abstraction *and* 
    # use Mono's old regular expression interpreter (which is slower, but has a
    # shorter setup time), uncomment the line below instead:
    # MonoSetEnv localhost MONO_IOMAP=all;MONO_OLD_RX=1

    MonoApplications localhost "/:/srv/www/localhost"
    <Location "/">
       Allow from all
       Order allow,deny
       MonoSetServerAlias localhost
       SetHandler mono
       SetOutputFilter DEFLATE
       SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary
     </Location>
     <IfModule mod_deflate.c>
       AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript
      </IfModule>
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@dummy-host.example.com
    DocumentRoot "/usr/local/apache2/docs/dummy-host.example.com"
    ServerName dummy-host.example.com
    ServerAlias www.dummy-host.example.com
    ErrorLog "logs/dummy-host.example.com-error_log"
    CustomLog "logs/dummy-host.example.com-access_log" common
</VirtualHost>

<VirtualHost *:80>
    ServerAdmin webmaster@dummy-host2.example.com
    DocumentRoot "/usr/local/apache2/docs/dummy-host2.example.com"
    ServerName dummy-host2.example.com
    ErrorLog "logs/dummy-host2.example.com-error_log"
    CustomLog "logs/dummy-host2.example.com-access_log" common
</VirtualHost>

моно-V выход:

root@david-ubuntu:~# mono -V
Mono JIT compiler version 2.6.7 (Debian 2.6.7-5ubuntu3)
Copyright (C) 2002-2010 Novell, Inc and Contributors. www.mono-project.com
    TLS:           __thread
    GC:            Included Boehm (with typed GC and Parallel Mark)
    SIGSEGV:       altstack
    Notifications: epoll
    Architecture:  amd64
    Disabled:      none
Дэвид Элнер
источник

Ответы:

1

Если вы установили моно среду выполнения, то вам нужно, чтобы ваши приложения работали, чтобы создать символическую ссылку на новую установку mono ... и mono-V при записи, а не выходить из версии 2.6.7 с использованием версии 2.10. ссылка, которую вы создаете, выглядит следующим образом:

    ln -s -f /opt/mono-2.10/bin/mono /usr/bin/mono
zegnhabi
источник
0

Модуль загружен надлежащим образом?

  • LoadModule mono_module /path/to/mono/module/mod_mono.so

Кроме того, вам нужно добавить это в вашей конфигурации:

  • Приложение AddType / x-asp-net .aspx .ashx .asmx .ascx .asax .config .ascx
  • DirectoryIndex Default.aspx

Приложения (виртуальные хосты) определены в файлах .webapp => hostname.com.webapp

<apps>
        <web-application>
                <name>Name of site</name>
                <vpath>/</vpath>
                <path>/path/to/root/</path>
                <vhost>hostname.com</vhost>
        </web-application>
</apps>

И чтобы загрузить ваши файлы .webapp, добавьте это в вашу конфигурацию:

  • MonoApplicationsConfigDir default / path / to / dir / with / webappfiles

Я надеюсь, что это поможет или, по крайней мере, укажет вам правильное направление.

Андреас Берглунд
источник
0

Я знаю, что этот вопрос старый, но как насчет этого:

  1. Установить мод_моно

    sudo apt-get установить libapache2-mod-mono mono-apache-server4

2. Настройте mod_mono

sudo nano /etc/apache2/mods-available/mod_mono.conf

AddType application/x-asp-net .aspx .ashx .asmx .ascx .asax .config .ascx
DirectoryIndex index.aspx

Include /etc/mono-server4/mono-server4-hosts.conf
  1. Настройте свой виртуальный хост

Подготовьте ваш публичный каталог

mkdir /home/alduin/www

Сделайте ваш каталог доступным для чтения Apache

sudo chown -R www-data:www-data /home/alduin/www

Создать файл конфигурации Apache

/etc/apache2/sites-available/default

ServerName yourdomain.co.uk
ServerAlias www.yourdomain.co.uk
ErrorLog /var/log/apache2/yourdomain.co.uk-error.log
CustomLog /var/log/apache2/yourdomain.co.uk-access.log combined
DocumentRoot /home/alduin/www/
 MonoServerPath yourdomain.co.uk "/usr/bin/mod-mono-server4"
 MonoDebug yourdomain.co.uk true # disable it in production
 MonoApplications yourdomain.co.uk "/:/home/alduin/"

<Location "/">
 Allow from all
 Order allow,deny
 MonoSetServerAlias yourdomain.co.uk
 SetHandler mono
 SetOutputFilter DEFLATE
 SetEnvIfNoCase Request_URI "\.(?:gif|jpe?g|png)$" no-gzip dont-vary

 AddOutputFilterByType DEFLATE text/html text/plain text/xml text/javascript

Запустить снова

sudo service apache2 restart

Для получения дополнительной информации проверьте этот пост: http://r2d2.cc/2014/03/25/asp-net-mvc-under-linux-with-mono/

Артур Кендзиор
источник